Sending orders straight from the kiosk (Print Server):
- Press the bottom, left corner of the intro screen.
- Enter the pass code (default is 1234).
- Select the Setup Wizard.
Using Lab 50 installed on a separate computer:
- Click on the Settings tab in Lab 50.
- Select the Fulfillment option on the left side of the screen to expand it.
- Select Print Server.
- Press the Setup Wizard button, and the Setup Wizard will launch.
Once you have the Setup Wizard open:
- Click on Printer Configuration.
- Click on Add Printer.
- In the menu at the right, select Fuji C8 / PrintPix NC1000.
- In the Printer Name field, enter “Fuji C8”, or any name you wish to use.
- Click the Add button.
- Click on the newly created Fuji C8 / PrintPix NC 1000 option in the top, left corner to display the options for this interface.
Setup Wizard Printer Configuration Screen
C8 Settings Options:
- Hot Folder: Change the path to the C8Spool folder on the machine with the C8 software installed. The default value is \\FRONTEND\C8spool\.
- Printing Mode: In this field, select Fuji C8 if it is not chosen already.
- Device Name: Enter the unique name of the C8 machine in the field (Default is SP1SRGB).
- ID: Enter the same name as entered in the Hot Folder section (Default is APM).
- Resizing Method: Select how you would like the printer to crop the images. The choices are FILLIN, FITIN, or NONE. The default is FILLIN.
- Leave the Wait for print, Indicate success on timeout and Timeout Seconds as is unless otherwise instructed for troubleshooting purposes.
PrintPix NC-1000 Settings Options:
- Hot Folder: This should be setup to match the settings in the FujiFilm Printpix NC-1000 application. The default path is C:\APM_Folders\Fuji_NC1000_Hotfolder\.
- Printing Mode: In the field, select Fuji NC-1000 if it is not chosen already.
- Device Name: Enter NC-1000 in the Device Name field (Default is SP1SRGB).
- ID: Enter the same name as entered in the Hot Folder section (Default is APM).
- Resizing Method: Select how you would like the printer to crop the images. The choices are FILLIN, FITIN, or NONE. The default is FILLIN.
- Leave the *Wait for print, Indicate success on timeout and Timeout Seconds as is unless otherwise instructed for troubleshooting purposes.