NOTE: This documentation relates to an earlier version of the APM / Lab 50 software.

Visit the current documentation home.

Sending orders straight from the kiosk (Print Server):

  1. Press the bottom, left corner of the intro screen.
  2. Enter the pass code (default is 1234).
  3. Select the Setup Wizard.

Using Lab 50 installed on a separate computer:

  1. Click on the Settings tab in Lab 50.
  2. Select the Fulfillment option on the left side of the screen to expand it.
  3. Select Print Server.
  4. Press the Setup Wizard button, and the Setup Wizard will launch.

Once you have the Setup Wizard open:

  1. Click on Printer Configuration.
  2. Click on Add Printer.
  3. In the menu at the right, select Fuji C8 / PrintPix NC1000.
  4. In the Printer Name field, enter “Fuji C8”, or any name you wish to use.
  5. Click the Add button.
  6. Click on the newly created Fuji C8 / PrintPix NC 1000 option in the top, left corner to display the options for this interface.

Setup Wizard Printer Configuration Screen

C8 Settings Options:

  • Hot Folder: Change the path to the C8Spool folder on the machine with the C8 software installed. The default value is \\FRONTEND\C8spool\.
  • Printing Mode: In this field, select Fuji C8 if it is not chosen already.
  • Device Name: Enter the unique name of the C8 machine in the field (Default is SP1SRGB).
  • ID: Enter the same name as entered in the Hot Folder section (Default is APM).
  • Resizing Method: Select how you would like the printer to crop the images. The choices are FILLIN, FITIN, or NONE. The default is FILLIN.
  • Leave the Wait for print, Indicate success on timeout and Timeout Seconds as is unless otherwise instructed for troubleshooting purposes.

PrintPix NC-1000 Settings Options:

  • Hot Folder: This should be setup to match the settings in the FujiFilm Printpix NC-1000 application. The default path is C:\APM_Folders\Fuji_NC1000_Hotfolder\.
  • Printing Mode: In the field, select Fuji NC-1000 if it is not chosen already.
  • Device Name: Enter NC-1000 in the Device Name field (Default is SP1SRGB).
  • ID: Enter the same name as entered in the Hot Folder section (Default is APM).
  • Resizing Method: Select how you would like the printer to crop the images. The choices are FILLIN, FITIN, or NONE. The default is FILLIN.
  • Leave the *Wait for print, Indicate success on timeout and Timeout Seconds as is unless otherwise instructed for troubleshooting purposes.

Fuji C8/PrintPix NC-1000 General Settings

  • No labels