edit 7.5 - Editing the DNP Dye-Sub Printer Interface Settings

Sending orders straight from the kiosk (Print Server):

1. Press the bottom, left corner of the intro screen.
2. Enter the pass code (default is 1234).
3. Select the Setup Wizard.

Using Lab 50 installed on a separate computer:

1. Click on the Settings tab in Lab 50.
2. Select the Fulfillment option on the left side of the screen to expand it.
3. Select Print Server.
4. Press the Setup Wizard button, and the Setup Wizard will launch.

Once you have the Setup Wizard open:

1. Click on Printer Configuration.
2. Click on Add Printer.
3. In the menu at the right, select DNP DS Printer.
4. In the Printer Name field, enter "DNP", or any name you wish to use.
5. Click the Add button.
6. Click on the newly created DNP Printer option in the top, left corner to display the options for this interface.

DNP DS Printer Options:

• Queue Delay (milleseconds): The default setting is 1500 seconds. This value should not be changed.

• Maximum Retries: The default setting is 160. This value should not be changed.

• Windows Printer Name:

• Print Size:

• Serial Number:

• Firmware Version:

If more than one printer is connected, repeat the above steps, for Printer Settings 2.

**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to fail.