Page History

Sending orders straight from the kiosk (Print Server):

...

1. Click on Printer Configuration.
2. Click on Add Printer.
3. In the menu at the right, select DNP DS Printer.
4. In the Printer Name field, enter "DNP", or any name you wish to use.
5. Click the Add button.
6. Click on the newly created DNP Printer option in the top, left corner to display the options for this interface.

DNP DS Printer Options:

• Queue Delay (milleseconds): The default setting is 1500 seconds. This value should not be changed.

• Maximum Retries: The default setting is 16060. This value should not be changed.

• Windows Printer Name: Select the Windows printer driver name desired from the drop-down menu. The list of available printers is populated with all printers available in Windows.

• Print Size: Select the print size that will be processed on the printer. Available options include 4x6, 5x7, and 8x10.

• Serial Number: This field is polled by the Setup Wizard and populated with the information reported by the printer software.

• Firmware Version: This field is polled by the Setup Wizard and populated with the information reported by the printer software.

• USB Port: This field is polled by the Setup Wizard and populated with the information reported by the Windows printer drivers.

• Ribbon Size: This field is polled by the Setup Wizard and populated with the information reported by the Windows printer drivers.

If more than one printer is connected, repeat the above steps , for within the Printer Settings 2.**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to failsection for each additional printer. The DNP PS printer interface can accomodate up to four DNP printers attached to a single machine.