Lab 50 Installation and Activation

Installing Lab 50

After verifying that the system you will be installing Lab 50 software on meets the requirements outlined in the Hardware Requirements section of the manual, you may install Lab 50. You should begin by downloading the latest version of the software from the Lucidiom website and saving it to the desktop of your machine.

To complete the installation, please do the following:

1. Double-click on the .exe file to begin installation of the software.
2. If a warning appears prompting you to verify that you want to open the file, click Run to continue.
3. Select the Language to use for your installation of Lab 50, then click OK.
4. Once the Introduction Screen Appears, click Next to continue.

5. Please read the Licensing Agreement, select the option I accept the agreement, and then click Next.

6. Select the installation path to use for installation of Lab 50, (the default location is C:\Program Files\Lucidiom Lab 50 7.0), then click on the Next button.

7. Select which icons you would like the software to create for you, or if you don’t want it to create any icons on the
Desktop or in the Quick Launch bar, select the Next button.

8. Confirm the Destination Location is the path you would like to use for the software installation, and then
select Install.

9. Once the software has finished installing, you will be prompted to restart your machine. You should restart the machine before proceeding to use Lab 50, but you may select to restart later if you have additional components downloading during installation such as Back Lab Burner. Click Finish to complete the installation.

Login and Activation

There are several key pieces of information needed to login and activate Lab 50. Once Lab 50 starts, you will need to
have the following credentials available:

• Username
• Password
• Dealer Code
• Product Key

These credentials are generally provided with the disc or via email shortly after the software has been purchased. If
you need any of this information for your activation, please contact Lucidiom Support. Each installation of Lab 50 requires a product key to activate the software, even if the software is not being used for processing orders. This product key is provided with the software and should be used to register the software on a single machine.

**Note: If you ever decide to move Lab 50 to another computer, please make sure to write down the product key and
then deactivate it from the home screen of the Lab 50 software. Once you have deactivated a license key, you can
install and activate the application on another machine using the same licensing.

First Time Login

The initial Lab 50 login requires the following:

1. Enter the username, typically dealeradmin.
2. Enter the password (provided to you after purchase of the software).
3. (Optional) If you want Lab 50 to remember the password or sign in automatically, check the appropriate box.
4. Click on the blue arrow button to the right of the text boxes to begin the sign-in process.

5. A new Window appears asking you to either activate with a product key or use an existing license file. Select “Activate Lab 50 now with my Product Key”.

6. On the next screen, enter the dealer code and product key you were issued, and then click the Next button.

7. Once the software has activated, you will see a confirmation screen indicating the activation was successful.

8. Click the Close button, and the application will launch into the Orders Screen.