Overview

For certain kinds of folio products there are unique product IDs in the Master catalog that that when enabled on a product Catalog in Lab 50 and/or installed on the kiosk through the kiosk content installer overrides (please see Release notes for the content installers) show the localized content.

Example of Adding French Canadian Content for the Web Through Lab 50

Step 1: Enabling the French Canadian Content

1. Go into the Store management area
2. Find and enable the Following Product IDs in the All Product Master Catalog

Flat Cards (French Canadian)

Step 2: Add Localized Products to the Web (Default) Catalog

1. Navigate to the web catalog
2. Under the desired category right click and select the option Add Products

Step 3: Configuring the product to print

There are a couple ways to set this up based upon what other products of the same size are setup and configured to print.

Method 1: Using an Already Configured Product as Alternate Fulfillment ID Within the Product Settings.

1. Once the desired localized products have been added to the appropriate category, double click on the product to edit the product settings
2. Set the price
3. change the name and description as needed
4. Set the Render mode (JPEG or PDF)
5. under the ID Option tab, you can set it to send as existing product ID that is already configured. If there are other products and/or sizes that output as the same size and file type, then enter the Product ID in the ID (optional) field to help expedite the setup.

Method 2: Adding the Localized Product to Print- Complete Print Server Setup

1. Once the desired localized products have been added to the appropriate category, double click on the product to edit the product settings
2. Set the price
3. change the name and description as needed
4. Set the Render mode (JPEG or PDF)
5. Go to the Settings->Fulfillment->Print Server area
6. Click on the Setup Wizard
7. Add the same products you added in the Product Catalog to the Products Printed Here section
8. In the Product Matrix area, Assign the Products to the appropriate printer interface
9. If the printer interface requires mapping a specific product to a particular print channel, paper magazine, output folder, etc. Go into the printer interface and configure the product as necessary within the interface