ColorFlow

To use the ColorFlow processing features in Lab 50, you'll first need to enable it within the Photo Processing screen.

1. At the top of the Menu bar, select Settings.
2. On the left panel select Photo Processing > ColorFlow.
3. Check the box Enable ColorFlow processing.

Configuring a new Workflow for editing Photos

Once you have enabled the ColorFlow processing option, you can begin setup of a new Workflow by clicking on the Add button at the bottom of the right panel.

The steps to configure a new Workflow include the following:

1. On the General tab, enter a name for the Workflow and check the box "Enable this workflow".
2. For the Outbound tab, select how you would like the software to handle orders being sent through this Workflow. Options within this tab include exporting to a new folder, creating order subfolders, and requiring lab operator interaction to start the ColorFlow processing in lieu of automatically exporting.
3. Under the Inbound tab, select how you would like Lab 50 to find the newly edited photos. Options on this tab include monitoring for photos in a new folder, checking for a folder name change, finding a completion file, or lab operator interaction indicating the editing is complete.
4. Using the Products tab, you will select which products to include or exclude from this Workflow. If you would like to process products differently according to product type, you will need to configure multiple Workflows.
5. Lastly, the Sources tab is used to specify which order types should use the Workflow for processing. You can also elect to ignore products that have been rendered at the kiosk should you decide to not offer this premium editing service for in-store orders.

• General tab Settings:
  • Name: A name for your new Workflow. This field is required. Support recommends a brief description of products included and/or sizing information. Example: Standard prints, up to 8x10
  • Description: A description of the Workflow. This may be used internally to add additional identifying information such as where the photos will be stored or what type of processing will be done.
  • Enable this Workflow: The check box enables the use of the Workflow for the selected settings. To disable a Workflow, un-check the box.

• Outbound tab Settings:
  • Require operator interaction:
  • Copy photos to folder:
    • Create order subfolders:
    • Override order folder suffix:
    • Mask order folder (with .tmp) until complete:
  • Create job file:
    • File format:
    • File location:
    • Filename:

• Inbound tab Settings:
  • Completion Mechanism:
    • Require operator interaction:
    • Monitor output folder for completion:
    • Completion file :
    • Order folder name change:
  • Photo output folder:
    • Original photos folder:
    • New folder:
  • Pause after completion:
    • Seconds:

• Products tab Settings:
  • Product selection menu:

• Sources tab Settings:
  • Web / Mobile Orders:
    • Pickup Orders:
    • Mail Orders:
  • Kiosk Orders:
    • Express Orders:
    • Pickup Orders:
    • Mail Orders:
    • Skip rendered folio products:
    • Skip folio products with rendering & xml data:

ColorFlow Indicators on the Orders Screen

There are six order status values that may be displayed on the Orders screen while processing orders through ColorFlow. All ColorFlow status updates are prefaced with Color flow: and appear directly under the order number for any given order.

The order status indicators include the following:

• Holding: The holding status appears when ColorFlow has been configured to only process one order at a time. Options that will require single-order processing include the following:
  • The option to "Copy photos to folder" is disabled under the Outbound tab.
  • The option to "Create Order Subfolder" is disabled under the Outbound tab, and the option to "Copy Photos to Folder" does not include an %ORDER% macro.
  • The "New Folder" option is enabled under Inbound tab > "Photo Output Folder", but the "New Folder" path does not include an %ORDER% macro.

• Ready to Send: This status is displayed if the "Require operator interaction to send" option is enabled. To start the ColorFlow Workflow, the lab operator will need to manually click the SEND button.

• Preparing: This notification is displayed while Lab 50 is copying photos and any necessary order files to the editing folder for processing.

• Waiting for Completion: This option is displayed on-screen while Lab 50 monitors for processing completion. If the Workflow is configured to "Require operator interaction to complete", a DONE button will be displayed until the operator clicks on it manually. If the WorkFlow is configured to monitor the inbound folder, folder name, or for a file complete indicator, a spinning icon will be displayed until the required completion status is reached through file count, folder renaming, or file creation.

• Processing Output: This notification is displayed while Lab 50 is copying edited files back into the database for rendering the final product(s).

• Complete: ColorFlow processing is complete, and the order will be sent to print after a slight pause to allow for the software cache to update.