Product Setup within the Fuji C8 & PrintPix NC-1000 Interface

The print sizes for glossy and matte as setup in the C8/PrintPix NC-1000 software on the Frontier will also need to be setup in the interface within the APM software in order to properly process orders.

1. Select the Configure Product Channels line to highlight it (the area around Configure Product Channels will turn blue).
2. Click on the small button labeled "…” that appears on the right-hand side.
3. A window called Product Channels will open which will allow for adding, editing and deleting product channels. As an example, highlight the 4x6 Print (2001) product and click Edit.
4. Change the channels as necessary for all four settings including Glossy/No Border, Glossy/Border, Matte/ No Border, and Matte/Border. **Note: The settings are case sensitive and must be typed in exactly as they appear in the C8 software.
5. Click OK after all channels are made for that product.
6. Repeat Steps 2-4 for each size as needed.

**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to fail.

Deleting a Product:

1. Select the product to highlight it (the area around the product will turn blue).
2. Click on the Delete button that appears on the right-hand side.
3. Click OK in the confirmation box, and the product will be deleted.