You will need the following tools to successfully complete the replacement of your Media Card Reader
|
|
|
|
Safety Note:
before touching any internal components especially circuit boards, make sure the APM is turned off and unplugged from the wall, surge strip etc. Also ensure you are completely grounded to prevent electro-static discharge that can damage the internal circuit boards found in the Kiosk.
Step 1-- Unlocking Front Bezel |
|
---|---|
|
|
|
|
Step 2 – Remove/Replace the Card Reader and/or CD Drive: |
|
|
|
|
|
|
|
Step 3 – Remove/Replace the Card Reader and/or CD Drive: |
|
The APM-3701 SATA Hard Drive is located toward the back of the kiosk; once the optical bay and receipt printer is removed, the hard drive chassis and the two screws that secure it into place will be exposed follow these actions; |
Remove both the SATA data cable and SATA power cable.
Remove the two screws used to secure the hard drive cage.
Slide the hard drive cage/chassis out along with the hard drive. Slide the hard drive chassis to the left to free it from the two metal hooks that help secure it in place.