NOTE: This documentation relates to an earlier version of the APM / Lab 50 software.

Visit the current documentation home.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

To create a new channel, navigate to Settings > Photo Processing > Auto Enhancement.

  1. Click on the Add button to open the new channel window.
  2. Under the General tab, fill in the following settings:
  • Name: Name of the channel
  • Description: A description for the channel for easy reference in the lab
  • Enable this Channel: Check the box to enable the channel
  1. Under the Color tab, use the slide bars to configure the color corrections that are to be made to the image. The following options are available:
  • Highlight Contrast
  • Shadow Contrast
  • Shadow Desaturation
  • Saturation
  • Brightness
  • RGB color values
  1. Under the “Advanced” Tab Use these settings to apply other
    corrections including the following
    ?? Red Eye Reduction
    ?? Noise Reduction
    ?? Brightness Adjustment
    ?? Color Sharpness
    ?? Shadow Values
    ?? Highlight Values
    5. Under the “Products” tab apply the color enhancement settings of
    this channel to the selected Photo Finale products that you wish to
    apply the color corrections to.
    6. Once completed Click Ok.
    7. (Optional) If you wish to create different I2E Profiles for different
    products that are going to different output devices, repeat these steps
  • No labels