NOTE: This documentation relates to an earlier version of the APM / Lab 50 software.

Visit the current documentation home.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

In certain instances, you may be required to print pages from the printer for diagnostic and support purposes. These
pages give vital information about the printer status, setup, and color quality.

These should be printed on plain, 20lb letter-size paper (not glossy paper). The unit is hard coded to print these
information pages on plain media. To print, simply replace the paper in Tray 1 with plain paper, and switch back
when finished.

***If these pages are printed on glossy media, you may have fusing issues which can cause
toner to adhere to and dirty the fuser, causing print quality issues.*

Press ENTER to switch to the menu mode.

  1. Load plain paper into Tray 1, as described above.
  2. Use the ? key to scroll down to the Print Pages function.
  3. Press ENTER.
  4. Use the ?/? and ENTER keys to select either the Configuration, Demo, or PS Test Page options
  5. Press ENTER.
  6. The page you selected will be printed.
  • No labels