The KIS-DKS Printer interface allows the APM or Lab 50 software to convert orders generated from an into a format that the KIS-DKS printer can accept and print.
Prerequisites
...
| Advanced Tables - Table Plus |
|---|
...
|
...
| |||
|
1. The APM and/or Lab 50 machine needs to be able to see the DKS machine across the local area network and vice versa. There are some special considerations for the networking, and based upon the current network configuration, some or all of these items may need to be setup in order to print to the DKS:
...
**Note: This should be done for you by the APM software Installer, but if this is not the case, follow these instructions:
...
...
| Advanced Tables - Table Plus |
|---|
...
|
...
| |||
|
- Right-click on the My Computer icon.
- Select Properties.
- Click on Advanced.
- Click on the Environment Variables.
- At the bottom half of the screen in the System Variables section, scroll down until the PATH option appears.
- Highlight PATH and then click on Edit.
- In the variable value field, scroll to the end of the field and then enter the following right after the last character: *;C:\APM\;C:\APM\Plugins*
- Click the OK button to save the changes.
- Click the OK button again on the Environment Variables window to close it.
- Click the OK button to close the System Properties window.
4. If Lab 50 is not present in the local installation, then at least one or more fulfillments must be enabled to print to a local printer connected to the APM. This is seen in the screenshot on below, taken from the main options of an enabled fulfillment in the Setup Wizard.
...
| Advanced Tables - Table Plus |
|---|
...
|
...
| |||
|
Setting Up the DKS Interface Using the Setup Wizard
...