...
Step 3 --Remove/Replace the Receipt Printer: |
|
---|---|
Orientate the tray pulled from Step 2 and
|
Warning | ||
---|---|---|
| ||
Please use caution to not damage the ribbon cables on removal and reinstall. The ribbon cables are secured into place by plastic tabs that have to be released before the ribbon cables can be safely pulled out |
| |
Once the two ribbon connects are released from the controller board orientate the tray so that the Receipt printer (front) is facing you. Open the receipt printer door. This will give you access to the two small screws that secure the receipt printer to the receipt printer chassis. See pictures to the right: |
|
Step 4 – Remove Rollers from the back of front panel (Optional and only if necessary) |
|
---|---|
|
|
Step 5-- Remove /Replace the Controller Board (Optional and only if necessary) |
|
---|---|
|
|
Step 6-- Remove /Replace the Power Converter Board (Optional and only if necessary) |
|
---|---|
. First disconnect
|
|