You will need the following tools to successfully complete the replacement of your receipt printer:
Before touching any internal components, especially circuit boards, make sure the APM is turned off and unplugged from the wall or surge protector. Also ensure you are completely grounded to prevent electrostatic discharge that can damage the internal circuit boards found in the kiosk. |
Step 1 – Unlocking Front Bezel |
|
|
---|---|---|
|
|
|
|
|
|
Step 2 – Remove the CD Drive |
|
|
|
|
|
|
|
|
|
|
|
Step 3 – Remove/Replace the Receipt Printer |
|
|
|
|
|
|
|
|
Step 4 – Remove Rollers from the back of the front panel (only if necessary) |
|
|
|
|
|
Step 5 – Remove/Replace the Controller Board (only if necessary) |
|
|
|
|
|
Step 6 – Remove/Replace the Power Converter Board (only if necessary) |
|
|
|
|