Page History

Sending orders straight from the kiosk (Print Server):

...

1. Click on Printer Configuration.
2. Click on Add Printer.
3. In the menu at the right, select Copal Dye-Sub DNP DS Printer.
4. In the Printer Name field, enter "CopalDNP", or any name you wish to use.
5. Click the Add button.
6. Click on the newly created Copal Dye Sub DNP Printer option in the top, left corner to display the options for this interface.

Copal Dye-Sub Printer Options:

DNP DS Printer Options:

• Queue Delay (milleseconds)Debug Mode: The default setting is false1500 seconds. This value should only be set to true for troubleshooting.not be changed.

• Maximum RetriesTime Out Seconds: The default setting is 120 seconds60. This value should not be changed.

• Windows Printer ID: The ID as shown on the LED display of the printer itself.Color Ribbon Size: Use Name: Select the Windows printer driver name desired from the drop-down menu to select the ribbon size that is loaded in the printer.

• Print Smaller Prints: If the *Color Ribbon Size option is setup for 6x9, and you want to use this printer to also print 4x6s, set this option to True. This is not as fast as 4x6s using the windows driver, but it will work. It will also cost more per print as well.

• . The list of available printers is populated with all printers available in Windows.

• Print Size: Select the print size that will be processed on the printer. Available options include 4x6, 5x7, and 8x10.

• Serial Number: This field is polled by the Setup Wizard and populated with the information reported by the printer software.

• Firmware Version: This field is polled by the Setup Wizard and populated with the information reported by the printer software.

• USB Port: This field is polled by the Setup Wizard and populated with the information reported by the Windows printer drivers.

• Ribbon Size: This field is polled by the Setup Wizard and populated with the information reported by the Windows printer driversUse Color Correction: To manually apply color correction to all prints, set to True. (Default is False).Change the Sharpness, Brightness, Contrast, Saturation, Red Balance, Green Balance, and Blue Balance as desired.

If more than one printer is connected, repeat the above steps , for Printer Settings 2 but change the Printer ID on the printer and in the Setup Wizard, so it is a different ID from the other printer.**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to failwithin the Printer Settings section for each additional printer. The DNP PS printer interface can accomodate up to four DNP printers attached to a single machine.