...
**Note: If the Copal is only printing a single size, then it is best to load the Windows driver and use the Windows printer interface instead of this one.
Prerequisites
- The Windows driver for the Copal printer needs to be properly installed and configured to print the correct size on the APM or Lab 50 machine.
- The Copal Printer needs to have the latest firmware installed.
- If more than one printer is installed, then each printer needs to have a unique ID. (This is the number found on the LED display on the front of the printer).
- If Lab 50 is not present in the local installation, then at least one or more fulfillments must be enabled to print to a local printer connected to the APM. This is seen in the screenshot below, taken from the main options of an enabled fulfillment in the Setup Wizard.
Wiki Markup |
---|
{table-plus:align=center|columnAttributes=style="text-align:center;"}
|!PrintSettings.JPG|thumbnail,border=1!|
|Print Settings|
{table-plus} |
Setting up Copal Dye-Sub Printer Using Setup Wizard
The Setup Wizard is used to configure the Copal Dye Sub Printer Interface.
...