To create a new channel, navigate to Settings > Photo Processing > Auto Enhancement.
Color Tab Advanced Tab Products Tab
- Click on the Add button to open the new channel window.
- Under the General tab, fill in the following settings:
- Name: Name of the channel
- Description: A description for the channel for easy reference in the lab
- Enable this Channel: Check the box to enable the channel
3. Under the Color tab, use the slide bars to configure the color corrections that are to be made to the image. The following options are available:
- Highlight Contrast
- Shadow Contrast
- Shadow Desaturation
- Saturation
- Brightness
- RGB color values
4. Under the Advanced tab, you can apply additional corrections including the following:
- Red Eye Reduction
- Noise Reduction
- Brightness Adjustment
- Color Sharpness
- Shadow Values
- Highlight Values
5. Under the Products tab, select the products to which you would like to apply the color enhancement settings in use for this channel.
6. Once complete, Click OK.
7. (Optional) If you wish to create different I2E profiles for products created on different output devices, repeat these steps for each device.