Adding Import Locations

Lab 50 offers configuration options to allow the harvesting of kiosk orders from APMs that are on the same local network as well as on remote networks (via an additional service called APM Order Agent).

1. To enable importing, access Settings > Order Management > Importing.
2. Use the drop-down menu to enabling importing and select the account to use for importing.
3. Set and select the desired settings from the options below:

• Temporary download location: Temporary location for store orders that are being downloaded. (This setting is generally not changed.)
• Only import orders during these hours: Check the box to restrict order importing hours. Set the start time and end time for order importing. (*Not recommended for busier locations.)
• Backup imported orders: Save a copy of imported orders to the backup location. The backup folder is located within the Import folder.

Importing Orders from a Local APM:

1. Click on the Add link.
2. When the window appears, enter the information for the following settings:
   1. Name: APM ID or the given APM name
   2. Location: The folder path to import the orders from this APM. Browse your network by clicking on the magnifying glass icon.
   3. Enable this import location: Check the box to enable this import location.
3. Click OK.
4. Repeat these steps for each and every APM that is on the local network.

**Note: Make sure the Lab 50 user account for Windows has sufficient privileges to access the orders via the network.

Importing Orders from Remote APMs:

1. Click on the Add link.
2. When the window appears, enter the information for the following settings:
   1. Name: Enter the APM ID or number provided in the setup email
   2. Enable this entry: Check the box to enable this import location.
3. Click OK.