NOTE: This documentation relates to an earlier version of the APM / Lab 50 software.

Visit the current documentation home.

The DKS Interface allows for setting up priority queues for each fulfillment based on the number of prints. There is a Primary and Secondary Priority for each of the three fulfillments, as well as a priority setting based on the number of prints. To set the primary priority:

  1. Use the drop-down menu on the far right of the field for Express Primary Priority, Pickup Primary Priority, and/or Mail Pickup Priority and set the desired priority. The options are: not set, high, normal, low, hold. The orders that are set to fall into the priority path category based on the number of prints will be sent to the location set in DKS Path.
  2. Set the value for the number of number of prints to differentiate between Priority and Secondary prints, so that an order will either go into the Priority or Secondary Queue for the given fulfillment based on how many prints are in the order. There is a setting for each fulfillment: Express Prints Cutoff, Pickup Prints Cutoff, and Mail Prints Cutoff. The default is 150. If all prints are supposed to go to the same queue no matter how many prints are ordered, set the number in this field to 0, all prints will go to the DKS Path.
  3. To setup a secondary priority, use the drop-down menu on the far right of the field for Express Secondary Priority, Pickup Secondary Priority, and/or Mail Secondary Priority and set the desired priority. The options are: not set, high, normal, low, hold. The orders that are set to fall into the priority path category based on the number of prints will be sent to the location set in DKS Alternate Priority Path.
  4. If any order from any fulfillment is supposed to go to an alternate folder (i.e. DKS Alternate Priority Path), then set the priority in the Priority to Alternate Path field. The options are: not set, high, normal, low, hold. The priority for this field will typically be the same setting as the Express Secondary, Pickup Secondary and Mail Secondary Priorities. If the priority is not set, then the orders will default back to the folder set in DKS PATH.

**Note: For more information on this, each field has an explanation at the bottom of the screen when you click on it in the Setup Wizard.

  • No labels