There are two types of Scanning options available within the APM Software:
- APM Scanning: Allows for customer to use a supported flatbed scanner (with TWAIN Driver loaded onto the APM) to input one image at a time into the APM software. This option is included as part of the standard APM.
- APM Stack Scanning Add-On: This is an add-on for an additional cost that allows for the Kodak i1210/i1220 scanner to work with the APM software and input batches of prints (usually 20 at a time) into the APM software. The Stack Scanner licensing and scanner are available at an additional cost. Please contact your regional sales representative for more information.
The scanner you would like to use on your kiosk must be a supported scanner. You can use the Setup Wizard to see the currently supported list by using the pull down menu in the Scanning Options section (located under APM Add-On Components). See Chapter 7 for more information.
Once you have purchased a supported scanner, install the latest TWAIN drivers for the scanner onto the APM. These drivers typically come with the scanner, or they can be found on the manufacturer’s website. It is recommended that you use the latest driver available on the manufacturer’s web site rather than the CD that came with the scanner.
**Note: At this time, only one scanner per kiosk can be supported.