Product Setup within the Photogize XConnect Interface

Each product needs to be setup to match with the appropriate translation in the XConnect software. This must be done for each and every product that will go to this interface. It is also best to account for both Glossy and Matte finishes (even if only one is available).

Configuring Products:

1. Select the Configure Translations line to highlight it (the area around Configure Translations will turn blue).
2. Click on the small button labeled "…" that appears on the right-hand side.
3. This will launch the Configure Translations window. There are options to Add, Edit, or Delete each product.

Adding/Editing Products:

1. To add a translation, click on the Add button. To edit a product, select it by clicking on it then click on the Edit button. This will launch the Product Translation window.
2. In the Product ID field, use the drop-down menu to select a product.
3. Set the Canvas Width and the Canvas Height to the width and height of the product.
4. For Canvas DPI, 300 is generally used.
5. The Finish option can be either glossy or matte.
6. Translation needs to match the name that is specified in the server.xml file generated by the Photogize XConnect. (See Setting up Photogize XConnect earlier in this appendix). This field is case-sensitive.
7. Sizing should be set to Crop.

Deleting a Product:

1. Select the size you wish to delete from the Configure Translations window.
2. Press the Delete button.

**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to fail.