Product Setup within the Hot Folder Interface

Each product to be printed also needs to be added to the product rendering settings. This must be done for each and every product that will go to this interface.

Configuring Products:

1. Select the Product Rendering Configuration line to highlight it (the area around Product Rendering Configuration turn blue).
2. Click on the small button labeled "…" that appears on the right-hand side.
3. This will launch the Product Rendering Settings window. There are options to Add, Edit, or Delete each product.

Adding/Editing Products:

1. To add a product, click on the Add button. To edit, select a product and click Edit. This will launch the Product Rendering window.
2. In the Product field, use the drop-down menu to select the product.
3. For DPI, 300 is generally used.
4. Enter the Width and Height, as indicated and if needed. These fields will auto-fill when the product is selected.
5. Click OK when finished.

Deleting a Product:

1. Select the size you wish to delete from the Product Rendering Settings window.
2. Press the Delete button.

**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be 3 unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to fail.