Product Setup within the Fuji JobMaker Interface

Each product size available in the APM and/or Lab 50 software will need to be configured to match up with the appropriate paper sizes that are setup in the Fuji software. Each product has its own internal APM Product ID.

Configuring Products:

1. Select the Product Settings line to highlight it (the area around Product Settings will turn blue).
2. Click the small button labeled "…" that appears on the right-hand side.
3. This will launch the Product Renderings window. There are options to either Add, Edit, or Delete each product.

Adding/Editing Products:

1. Click on the Add button, or select an existing product and click the Edit button.
2. Select the product from the Product drop-down menu.
3. Enter the Width and Height in inches. Ex. 4x6, Width=6.00 and Height=4.00.
4. Enter the DPI in the field labeled DPI. The default value is 300.
5. In the Code field, enter the Fuji product code that will be used to print this product.
6. In the Bordered Code field, enter the Fuji product borders code. If this field is left blank, the software will use the information in the Code field.
7. Click OK to save the settings for that product.
8. Repeat for each product as needed.

**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to fail.

Deleting a Product:

1. Select the product you would like to delete by clicking on it to highlight it.
2. Click on the Delete button.
3. Repeat for each product you would like to remove.
4. Click OK when finished.