NOTE: This documentation relates to an earlier version of the APM / Lab 50 software.

Visit the current documentation home.

Sending orders straight from the kiosk (Print Server):

  1. Press the bottom, left corner of the intro screen.
  2. Enter the pass code (default is 1234).
  3. Select the Setup Wizard.

Setup Wizard Printer Configuration Screen

Using Lab 50 installed on a separate computer:

  1. Click on the Settings tab in Lab 50.
  2. Select the Fulfillment option on the left side of the screen to expand it.
  3. Select Print Server.
  4. Press the Setup Wizard button, and the Setup Wizard will launch.

Once you have the Setup Wizard open:

  1. Click on Printer Configuration.
  2. Click on Add Printer.
  3. In the menu at the right, select PDF Printer.
  4. In the Printer Name field, enter “PDF”, or any name you wish to use.
  5. Click the Add button.
  6. Click on the newly created PDF Printer Interface option in the top, left corner to display the options for this interface.

PDF Printer General Settings:

  • Printer: In this field, use the drop-down menu to select the correct printer name for this interface from the printers installed on this machine. By default, the EQ-9800/9850 printer should be selected.
  • Check for SNMP Printer: This option should be checked by default. If the SNMP feature is enabled on the printer, the Setup Wizard can send queries for printer information. We recommend this setting always be enabled if the printer is configured to support it.
  • Automatically Configure Products: If this option is checked, the APM software will automatically configure and maintain the PDF interface settings. This setting is enabled by default.
  • No labels