Editing the Silverwire OM HotFolder Interface Settings

Sending orders straight from the kiosk (Print Server):

1. Press the bottom, left corner of the intro screen.
2. Enter the pass code (default is 1234).
3. Select the Setup Wizard.

Using Lab 50 installed on a separate computer:

1. Click on the Settings tab in Lab 50.
2. Select the Fulfillment option on the left side of the screen to expand it.
3. Select Print Server
4. Press the Setup Wizard button, and the Setup Wizard will launch.

Once you have the Setup Wizard open:

1. Click on Printer Configuration.
2. Click on Add Printer.
3. In the menu at the right, select Silverwire OM Hotfolder Interface.
4. In the Printer Name field, enter “Silverwire”, or any name you wish to use.
5. Click the Add button.
6. Click on the newly created Silverwire OM Hotfolder Interface option in the top, left corner to display the options for this interface.

Silverwire OM HotFolder General Settings:

• Order File Location Destination: The folder in which order images will be placed. By default this is C:\OMHotFolder, but it may also be a UNC type location such as \\StorageServer\APMOrders. As long as the machine can see the folder and write to it, then the Hot Folder path can be anywhere on the network.

• DPI: Enter the desired output DPI in this field. The default value is 200.