Editing the Photogize XConnect Interface Settings

Sending orders straight from the kiosk (Print Server):

1. Press the bottom, left corner of the intro screen.
2. Enter the pass code (default is 1234).
3. Select the Setup Wizard.

Using Lab 50 installed on a separate computer:

1. Click on the Settings tab in Lab 50.
2. Select the Fulfillment option on the left side of the screen to expand it.
3. Select Print Server.
4. Press the Setup Wizard button, and the Setup Wizard will launch.

Once you have the Setup Wizard open:

1. Click on Printer Configuration.
2. Click on Add Printer.
3. In the menu at the right, select Photogize XConnect.
4. In the name Printer Name field, enter “PG”, or any name you wish to use.
5. Click the Add button.
6. Click on the newly created Photogize XConnect Interface option in the top, left corner to display the options for this interface.

Photogize XConnect General Settings:

• Harvest Folder: This should be set to the same value as the Polling Folder path in the Photogize XConnect setup. (Default is _C:\RasterFolder_). If the folder is located on a separate machine on which Photogize is installed, the computer name needs to be included (e.g. \\ComputerName\RasterFolder ).

• Configure Translations: This is used to match product setup between Photogize and the APM. See the next section for detailed instructions.

• Timeout Seconds: Leave as default (which is 600 seconds) unless instructed to change for troubleshooting purposes.

• Leave Order On Cancel: Indicates whether or not to leave the order in the hot folder for printing later when a user cancels the job. The default value is False.

• Debug: If after changing all of the settings, the Photogize XConnect interface does not work, come back to this screen and set this to True. (The default value is False.)