Step 1 - Open the Case: |
|
|---|---|
1. Start by taking out the screws from the rear casing. There are four on top and one on each side. |
|
2. There is a fifth screw located behind the monitor and underneath the receipt panel, make sure to unscrew that. |
|
3. Once the casing is unscrewed take it off. |
|
4. Remove the cover plate. |
|
5. Unscrew the side-mounted screws from the front panel. |
|
6. Pull to remove the front panel. |
|
Step 2 – Remove/Replace the Card Reader and/or CD Drive: |
|
|---|---|
7. Take the screws out of the card reader bracket. |
|
8. Unplug the IDE cable and power supplies connected to the CD/DVD drive. |
|
9. Unplug the PCMCIA SCSI cable from the SCSI card. |
|
10. Unplug the USB connected to the inside of the card reader. The card reader should slide out of the front of the unit. |
|
11. To replace the CD/DVD drive, get a small screw driver and unscrew it from the bracket. |
|
12. Slide the CD/DVD drive forward. |
|
13. To replace the card reader undo the large screws from the bracket. |
|
14. The card reader should slide forward. |
|
