...
- The APM and/or Lab 50 must be able to see the Fuji Frontier across the local area network and vice versa.
- Fuji C8: The machine running the Fuji C8 software must be properly configured and running. (Please refer to Fuji documentation for setup.)
- PrintPix NC-1000: The machine must be running the NC-1000 Print Pix Utility and the Windows driver must be loaded onto the system.
- If Lab 50 is not present in the local installation, then at least one or more fulfillments must be enabled to print to a local printer connected to the APM. This is seen in the screenshot below, taken from the main options of an enabled fulfillment in the Setup Wizard.
...
| Advanced Tables - Table Plus |
|---|
...
|
...
| |||
|
Setting up the Fuji C8 & PrintPix NC-1000 Using the Setup Wizard
...