Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin

{:align=right|columnAttributes=
Wiki Markup
Advanced Tables - Table Plus
columnAttributes
style="text-align:center;"
alignright

Image Added

Product Rendering within the Fuji Frontier PIC 2.6 Interface

} |!ProductRendering.JPG|thumbnail,border=1!| |Product Rendering within the Fuji Frontier PIC 2.6 Interface| {table-plus}

Each product size available in the APM and/or Lab 50 software will need to be configured to match with the appropriate paper sizes that are setup in the PIC software. Each product has its own internal APM Product ID.

...

  1. Click the Add button, or select an existing product and click the Edit button.
  2. Select the product from the Name pull down menu.
  3. Enter the Width and Height in inches. Ex. 8x12, Width=8.00 and Height=12.00
  4. Enter the DPI in the field labeled DPI. The default value is 300.
  5. If Image Intelligence is used on the PIC, Select Y in the Optimize field.
  6. Set the Retouch and Orient Fields to 0.
  7. In the Code field, enter the Fuji Frontier PIC 2.6 code that will be used to print this product.
  8. Enter C in the Color field.
  9. Set the Crop field to True.
  10. Leave the Crop code blank.
  11. If a separate code is used for borders, enter the code in the Borders Code field. If this field is left blank, the software will use the information in the Code field.
  12. Click OK to save the settings for that product.
  13. Repeat for each product needed.

...

{:align=right|columnAttributes=
Advanced Tables - Table Plus
columnAttributes
style="text-align:center;"
alignright

Image Added

Adding a Product and Rendering within PIC 2.6 Interface

} |!AddProduct.JPG|thumbnail,border=1!| |Adding a Product and Rendering within PIC 2.6 Interface| {table-plus}

**Note: Make sure to account for all products, not just the print products. For example, 8x10 Prints, 8x10 Greeting Cards and 8x10 Wall Art are considered to be three unique products by the APM software. Therefore, each will need to be assigned to the printer and configured in a printer interface. Failing to account for an offered product will cause orders to fail.

...