Page History

...

The Image USB is made through Lab 50 or Print 50. There is no option to create the USB at the kiosk, like you can do with discs. 

TO create hte the Image USB:

1. Setup: In Lab 50, set your output folder under Settings > Fulfillment > Media Output.
   Image Added
   
   
2. Right-click the order and choose the new “Export Media” option. Media Products” option instead of a typical Export.
   Image Added
3. This will save the applicable photos to a folder where they can then be copied to a fresh the folder you defined in step 1, where you can then copy them to the USB stick.
4. Open that folder, open the drive where the USB is plugged in and copy over the images.

...

1. Do I need to use Lab 50 to create the USB?
   1. Yes. (Or Print 50). 
2. Are you going to ever have it like the DVDs, where you can "burn" it at the kiosk?
   1. This is not planned for the short term. Long term remains to be decided.

...

1. Does it matter what device was used when ordering the USB (phone versus a memory card)?

   1. No.