The Noritsu DPOF interface allows the APM or Lab 50 software to convert orders generated from an APM into the same order structure as a Noritsu CT-1/CT-2 machine with auto print channel and quantity mapping.
Prerequisites
- The APM and/or Lab 50 machine needs to be able to see the Noritsu machine across the local area network and vice versa.
- On the Noritsu machine, the necessary print channels need to be setup prior to the APM/Lab 50 setup. This includes separate channels for glossy/matte finishes.
- The Noritsu machine needs to be on Version E or higher.
- If Lab 50 is not present in the local installation, then at least one or more fulfillments must be enabled to print to a local printer connected to the APM. This is seen in the screenshot below, taken from the main options of an enabled fulfillment in the Setup Wizard.
{table-plus:align=center|columnAttributes=style="text-align:center;"}
|!PrintSettings.JPG|thumbnail,border=1!|
|Print Settings|
{table-plus} Wiki Markup
Setting up the Noritsu DPOF Using the Setup Wizard
The Setup Wizard is used to configure the APM to print to Noritsu DPOF Interface.
...