Page History

...

To configure Lab 50 for processing kiosk orders, you’ll need to access the Setup Wizard. The Setup Wizard may be accessed via Settings > Fulfillment > Print Server, and then click on the APM Setup Wizard button on the right-panel.

Step 1: Adding and Configuring a Printer Interface

1. Click on the Printer Configuration button in the Category Navigation pane.
2. Click on the Add Printer option from the Primary Navigation pane.
3. Select the printer interface you wish to add from the list of drivers.
4. Enter a name for the printer (preferably something simple and unique), and press the Add button.

...

1. Click to select the appropriate printer from the list in the Primary Navigation pane.
2. The configuration settings for your selected interface will display in the Customization pane.
3. Repeat for any additional printers.

Step 2: Selecting Printable Products

After the printer interfaces have been properly configured, the next step to choose the products you wish to print from the APM.

...

**Note: For proper operation, make certain that every print product you are offering for each fulfillment is checked for all available columns.

Step 3: Assigning Interfaces to Products

This last step involves assigning any available printer interfaces to the listing of the available printed products.

1. Click on the Product Matrix (All Fulfillments) option in the Primary Navigation pane.
2. For each product listed, click on the Printer column and select the desired printer from the drop-down menu.
3. If there is more than one Product Matrix option (see figure below), repeat for each matrix.
4. When you are finished, save the settings by selecting the File menu, then Save.

Additional Options available within the Setup Wizard

General Print Settings

• Print separator page between orders: Enabling this option will print an additional invoice at the end of every order.

...

• Print Index Print with all orders: Includes an index print in every order that is printed.

Card Catalog Settings

If the Card Catalog product is being offered to your customers, use this screen to access and change the universal settings for all card catalogs produced by the software.

...

• Column Count and Row Count: Use the drop-down menus to select the number of images you would like to display on the horizontal and vertical planes, respectively.

Customize Logo Settings

Customizing the Logo:

1. Check the Use Custom Logo in APM Software and on receipt option.
2. Press the Change Logo button and locate your image file on the local hard drive. This file will be used to customize your card catalog products and index print products only.

**Note: The image must be in JPEG, BMP, or TIFF format.

32. Press the Open button in the dialog box after selecting your image. Your custom image will then be applied.

In the Lab 50 software, the other viewable options are not applied.