Page History

...

1. Press the bottom, left corner of the intro screen.
2. Enter the pass code (default is 1234).
3. Select the Setup Wizard.

Using Lab 50 installed on a separate computer:

...

• Order File Location Dest: Enter the location of the Orders folder on the Fuji machine using the UNC naming convention.  The order file should send to the shared Jobmaker folder on the Fuji machine.

**Note: If the Fuji machine is called "PIC390", then the setting should be changed from C:\APM-XXXX\JobMaker\Orders to \\PIC390\OrdersJobmaker\.

• Image File Location: Enter the location of the Images folder on the Fuji machine using the UNC naming convention.The image files should send to the shared Jobmaker folder on the Fuji machine.

**Note: If the Fuji machine is called "PIC390", then the setting should be changed from C:\APM-XXXX\JobMaker\Images to \\PIC390\ImagesJobmaker\.

• Purge Days: Enter the number of days that all order files and images should reside in the folders as defined above. If this is set to 0, the files will remain indefinitely. Otherwise, files from these locations that are older than the given number of days will be erased upon boot up. The recommended default is three days.

...

• Automatic Image Correction: Performs automatic image correction for all photos. These settings are defined in the JobMaker software. Default setting is True.