Versions Compared

Old Version 4

changes.mady.by.user Diane Robles

Saved on

compared with

New Version 5

changes.mady.by.user Rachel Van Tassel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

There are two types of Scanning options available within the APM Software:

  • APM Scanning: Allows for customer to use a supported flatbed scanner (with TWAIN Driver loaded onto the APM) to input one image at a time into the APM software. This option is included as part of the standard APM.
  • APM Stack Scanning Add-On: This is an add-on for an additional cost that allows for the Kodak i1210/i1220 scanner to work with the APM software and input batches of prints (usually 20 at a time) into the APM software. The Stack Scanner licensing and scanner are available at an additional cost. Please contact your regional sales representative for more information.

The scanner you would like to use on your kiosk must be a supported scanner. You can use the Setup Wizard to see the currently supported list by using the pull down menu in the Scanning Options section (located under APM Add-On Components). See Chapter 7 for more information.

Once you have purchased a supported scanner, install the latest TWAIN drivers for the scanner onto the APM. These drivers typically come with the scanner, or they can be found on the manufacturer’s website. It is recommended that you use the latest driver available on the manufacturer’s web site rather than the CD that came with the scanner.

**Note: At this time, only one scanner per kiosk can be supported.

--------------

Since the APM uses the TWAIN driver for scanning, most of the configuration is performed within the scanner driver supplied by the manufacturer. Please refer to your scanner’s documentation supplied by the manufacturer for making changes to the configuration for color calibration, sharpening, DPI settings, etc. Additionally, there are some settings that may be configured in the Setup Wizard for all model scanners.

...

**Note: For scanner calibration, refer to the manufacturer’s instructions for adjusting the scanner settings. You may also use the APM software to make further adjustments by printing a scanner calibration sheet from the admin menus. See Chapter 6 for more information on accessing this feature.

 

Wiki Markup
{table-plus:align=center|columnAttributes=style="text-align:center;"} 
|!ScanningOptions.JPG|thumbnail,border=1!|
|Scanning Options Screen|
{table-plus}