...
1. Install the Lab 50 software on the new machine and get the machine networked with your kiosks. You can download the software from the Lucidiom support site using . Click on the following link adn logging into the support site with link below, then login using your APM network credentials:
http://www.lucidiom.com/clientlogin.aspx?login=Downloads&redirect=/support/downloads.aspxSupport Downloads & Updates
2. Copy over your settings from your existing Lab 50 installation . Depending on what version you are on the files are going to be in different locationsto the machine with your newly installed software. The location of the files to copy will vary with your software version as follows:
| Panel |
|---|
Version7.08The first file you need to copy is found in C:\Program Files\Lucidiom Lab 50 7.0{} directory and is labeled: preferences.xml You will also need to copy from C:\Program Files\Lucidiom Lab 50 7.0\Tools\Printserver the following: apmconfig_printstation.xml Version 7.5The first file you need to copy is found in C:\Program Files\Lucidiom Lab 50 7.5{} directory and is labeled: preferences.xml You will also need to copy from C:\Program Files\Lucidiom Lab 50 7.5\Tools\Printserver the following: apmconfig_printstation.xml Version87.0The first file you need to copy is found in C:\Program Files\Lucidiom Lab 50 {} 7.0 directory and is labeled: preferences.xml You will also need to copy from C:\Program Files\Lucidiom Lab 50 \Tools7.0\Printserver the following: apmconfig_printstation.xml |
3. On the new installation of Lab 50, drop your copied files into the same directories.
| Info | ||
|---|---|---|
| ||
It is best to have both machines on the same version before copying items over. So please configuration files. Lucidiom Support recommends that you update the existing machine first before copying files over to the new machine to ensure the information is consistent between software versions. |
4. Once you're ready to transfer the license, you will need to copy write down the license key from the "Home" tab in Lab 50 and then select "Deactivate License". If you are unable to do this, you can still email support to have the license deactivated. When emailing, please provide the Licnese License as it appears on your screen.
5. On the new installation, use the following information to log into your account using your dealer credentials and activate the license with the key you copied down once cleared and enter your dealer credentials(once it is reset).
6. Make sure that on your new machine you have the same access and permissions to permission settings on the same network resources as you had on the previous machine to ensure full functionality.