Page History

The Print Server is the application used to connect an APM to a local printer. When the Print Server is used, orders are routed to the local printer for immediate printing. The Print Server software runs minimized on the APM, and it requires a printer to be connected to the APM directly or through a local network.

...

The Print Server automatically prints any orders that appear in the scanned folder. Since the orders are automatically printed to whatever interface is setup, there is no way to manage or control the order in which they are printed. If orders must be managed, then the Lab 50 software will need to be installed on another computer and configured to process the orders.

Stopping the Print Server

To stop the Print Server application, you will need to close it. There are two ways to do this:

1. From the Windows desktop, double-click the APM Hardware Attendant. Highlight the Print Server application, and then click the Stop button. Or,
2. Maximize the Print Server application by double-clicking on its icon in the system taskbar (in the lower, right corner of the screen). Click the Quit button to close the Print Server.

Reprinting an Order (Local Printing on an APM)

Orders printed by the Print Server are saved on the APM for 7 days. During this time, they may be reprinted.

Reprinting an order using the Print Server:

1. Navigate to the Admin screen by pressing the bottom, left corner of the screen.
2. Enter the passcode.
3. Select the Reprint Order button
4. Select the order to be reprinted
5. Press the Reprint Selected Order button